Where there’s wood, there are chips, and where there’s baking, there’s bound to be stains. If you use your oven regularly and don’t immediately reach for the cleaning cloth afterwards, residues will inevitably remain on the inside of the oven. This burns in more and more each time the oven is heated up – you won’t get any further with a cleaning cloth. But with an ingenious trick, you can declare war on the stuck-on residue! Find out here how you can easily clean your burnt-on oven with tabs.

Baked-on oven: why dishwasher tabs are the first choice

Anyone who owns a dishwasher probably has them at home. We’re talking about dishwasher tabs 🛒. They usually do their job in the dishwasher and turn dirty dishes into clean ones. But did you know that you can use dishwasher tabs in a variety of ways throughout the household? One option, for example, is to clean the baked-on oven with tabs. The surfactants contained in the tabs dissolve greasy residues and stubborn incrustations.

The steam method

If your oven is only slightly dirty, the gentle steam method is often sufficient:

• Preheat the oven to 50 degrees – As soon as the temperature is reached, switch the oven off again.
• Dishwasher tabs in the water bath: Grab an ovenproof dish, fill it with about 200 milliliters of hot water and throw in one or two dishwasher tabs. The tabs will now slowly dissolve.
• Off to the oven: Place the tin in the switched-off, still warm oven and close the door. Now allow the tabs to steam out like in a sauna.
• Leave to take effect: Leave the mixture to work for one to two hours, the vapor will settle on the inside walls.
• Wipe out as a finishing touch: Wipe out the inside of the oven with a damp cloth and allow everything to dry thoroughly.

Tip: Make sure you use tabs with a water-soluble film or remove the film beforehand – you definitely don’t want to clean up any melted plastic residue. Make sure you wear gloves!

The paste method

If your oven is really burnt in, you need to bring out the big guns. With a homemade dishwasher paste, even old encrustations become history:

• Crumble dishwasher tabs: Crush two to three tabs in a kitchen towel and grind them into powder.
• Mix the paste: Mix the powder with a little warm water until you have a creamy paste. It should be nice and smooth – coarse grains could damage your oven.
• Off to the oven: Apply the paste generously to the soiled areas.
• Wait and see: Leave the paste on for three to four hours or preferably overnight.
• Scrub and wipe: Remove the paste with circular movements and a damp sponge. Finally, wipe everything with clean water and leave to dry.

Caution: The paste must not get onto the heating rods and seals! These could be damaged on contact

You may also be interested in these articles:

The advantages and disadvantages of cleaning a baked-on oven with tabs

Cleaning your baked-on oven with tabs has some advantages and disadvantages. On the positive side, you probably already have dishwasher tabs at home and don’t need to buy extra expensive special cleaning agents for your oven 🛒. In addition, even stubborn stains are dissolved due to the cleaning agents contained in the tab.

However, make sure that you remove all residue from the dishwasher tabs from your oven! Failure to do so can lead to unpleasant odors the next time you use it. Another disadvantage is that the tabs are not suitable for all areas of the oven. Seals and heating elements can be damaged by the aggressive chemicals in the tabs.

Conclusion: A real insider tip for savers

Cleaning your baked-on oven with tabs is practical, inexpensive and surprisingly effective. Perfect if you want a clean oven but don’t want expensive special products. Try it out, you’ll be amazed!

Cleaning a burnt-on oven with tabs: A quick look

Source: mediamarkt.de

The links marked with the shopping cart 🛒 are affiliate links. The products are researched to the best of our authors’ knowledge and some are also recommended from personal experience. If you click on such an affiliate link and buy something through it, our editorial team will receive a small commission from the online store in question. For you as a user, the price does not change and there are no additional costs. The income helps us to offer you high-quality, entertaining journalism free of charge.

It has been raining heavily in Germany for weeks now, making the humidity sometimes feel unbearably high. Many people don’t even want to ventilate in the humid outdoor air. Read here why this could become a problem.

To prevent mold from forming in your home, you should ventilate regularly. When we exhale, shower or cook, small droplets are created in the air, which slowly increase the humidity. This moisture must escape to the outside: So open the windows! But what if it is also damp outside due to heavy rain? Doesn’t that bring even more moisture into the rooms?

Reading tip: Ventilate properly: avoid mold and save money

Rain does not equal moisture

Just because it is raining constantly outside and the air feels humid does not automatically mean that the humidity is really high. Many factors play a role here, the most important being the temperature. Warm air holds more moisture than cold air.

It is usually warmer in living rooms than outside. This should be the case, as it is the only way to prevent mold. Cool air contains less moisture than warm air. A rule of thumb says that the maximum moisture content of the air approximately doubles when the temperature rises by 10 degrees Celsius. As the air warms up, its ability to absorb moisture increases. For this reason, a greater amount of moisture can be removed from living spaces in the cold months by ventilating with cooler outside air.

You may also be interested in these articles:

Be sure to ventilate even when it rains

You should ventilate even when it’s raining, because a shower cools the air down to a few degrees, especially in summer. This is ideal for ventilation, as moisture collects in rooms at any time of year and needs to get out. So if you ventilate after heavy rain, the warm air full of moisture can easily escape outside.

Even if a little more moisture than usual flows into your home due to rain, fog or snow, it will be absorbed by the warmer indoor temperature.

How to ventilate properly

That’s why it’s so important to heat in winter. Only when the air inside is warm can it bind moisture. We recommend no less than 16 degrees in your own four walls. This immediately reduces the risk of mold.

But the right technique is also important: Only ever ventilate intermittently, preferably in the morning and evening. This allows the air to exchange properly. If you leave your window ajar, the interior cools down too much, especially in winter. This encourages mold growth.

The exception

If it is just as warm outside as inside, the air exchange may not be quite as successful. If the humidity outside is high, the droplets in the interior can no longer be transported. However, this rarely happens in Germany, even in summer, and when it does, it tends to be during the day. If you ventilate early in the morning and late in the evening, it is usually cooler outside than inside.

If the humid weather persists over a long period of time, a hygrometer 🛒 can also help. The device provides information about the humidity and gives you an indication of when it is appropriate to ventilate – i.e. when the humidity outdoors is lower than indoors.

If you have the feeling that your home is permanently too damp, you should consider a dehumidifier. 🛒 think about it.

Source: utopia, geo

The links marked with the shopping cart 🛒 are affiliate links. The products are researched to the best of our authors’ knowledge and some are also recommended from personal experience. If you click on such an affiliate link and buy something through it, our editorial team will receive a small commission from the online store in question. For you as a user, the price does not change and there are no additional costs. The income helps us to offer you high-quality, entertaining journalism free of charge.

As an all-rounder, white sneakers go with every outfit and every occasion. However, the bright sneakers have one annoying disadvantage: they are particularly susceptible to dirt, dust and stains. With a few tips and home remedies, you can clean your white sneakers and get them really clean again. Here you can find out how to prevent stains on sneakers and make dirty, originally white sneakers shine again. And all without a washing machine!

Cleaning white sneakers: no need for a washing machine

Although it is very tempting to simply wash dirty sneakers in the washing machine, it is better not to do so. The high temperatures and the spin cycle can loosen the glue, deform the shoe or crack the sole. For these reasons, cleaning sneakers made of fabric in the washing machine should only be an absolute emergency solution. Leather sneakers have no place in the washing machine anyway.

The basic rule is therefore: Invest a little more time and clean your shoes with household products and a brush or sponge. It is best to brush the sneakers thoroughly before cleaning and remove the laces. Clean them separately with soap and water or washing-up liquid.

Tip: Waterproofing spray protects against dirt and water

Better safe than sorry. Impregnate your white sneakers with a spray after purchase. This makes them less susceptible to unsightly stains, dirt and water.

Clean white sneakers with toothpaste

Over time, however, even waterproof shoes are not spared from dust and dirt. Toothpaste is a tried-and-tested household remedy that is ideal for removing stains. It also works wonders on white sneakers – whether made of fabric or leather. First apply a little washing-up liquid with a damp sponge. Then rub the sponge over the white sneakers in a circular motion until a little foam forms. Dab this off with a cloth. Then repeat this step with white toothpaste instead of washing-up liquid. Then leave the sneakers to dry for a few hours.

Get sneakers white again with baking soda

Mix baking soda and colorless washing-up liquid in a 1:1 ratio and apply the mixture to the dirty sneakers with a damp sponge or toothbrush. Leave the foam to work for a while and then wipe it off with a damp cloth.

Reading tip: Here you will find 4 tips to wash yellowed socks white again.

Cleaning white sneakers with bleach

Caution is advised when using bleach! The chemical agent should only be used to clean the rubber sole or a heavily soiled fabric shoe anyway. Mix two tablespoons of bleach powder with half a cup of water and apply the mixture with a toothbrush or cotton bud. Alternatively, you can also use liquid bleach. Both products are available at drugstores.

Important: Always wear gloves and safety goggles during the process. The work surface should also not come into contact with the chemical agent. It is therefore essential to use a carpet pad. In addition, the bleaching agent must not be left to work for too long. The sole of the shoe or the fabric shoe should then be rinsed thoroughly with clean water.

You can also use a dirt eraser

Dirt erasers are available at any drugstore for little money. You can use a magic sponge like this to remove stubborn dirt and stains from rubber soles, shoe caps and even smooth or artificial leather. Simply moisten the sponge slightly and use it to work on the dirty areas. To avoid damaging the material, you should be a little more careful with the dirt eraser on leather shoes and not rub it too hard over the surface.

Dirty sneakers can ruin any outfit, no matter how chic. That’s over now. Whether they’re made of leather or fabric – thanks to these tips, your sneakers will look like new in no time at all.

Sources: vogue, rtl